NSD Safety Mats

Item Code: NSD Safety Mats

NSD | Safety Mat Systems

Heavy duty and flexible safety mat system. The Category 3 controller meets all safety standards. This style system is the traditional style of a normally open (NO) switch mats. Customized shapes and sizes of mats is our specialty with large 6 x 12 single mat capability. Made in USA.

Break through technology provides digital (on/off) switching for safety mat applications. The advanced switching mechanism provides the following:

  • Safety mats are designed to be machine interfaced with only controllers for normally open SPST 4-wire safety mats.
  • The safety mat has no rigid steel electrodes used in the switching mechanism that can rust and dent.
  • The safety mat contains no wiring solder joints within the mat assembly that could degrade or short out. Wiring solder joints can fail under loads such as fork truck or hand cart traffic.
  • Flexible electrodes life cycle over 5,000,000 switch activations.
  • Safety mats provide increased reliability and safety with longer product life.
  • Customized wire exit positions available with no additional tooling costs.
  • flexible electrodes provide a product that is flexible and won't kink or short out like rigid steel electrodes when bent.
  • The mat electrodes are: Non-Corrosive Flexible | Non-Magnetic Anti-Static
  • Safety mats can use AC or DC input power.
  • Large single mat manufacturing process helps eliminate additional interconnect pieces required by others and simplifies installation.
  • Dual 20' (6.1m) lengths of two-conductor, 22 gauge multistrand 300 VAC (four conductors total), CSA & UL Listed wiring per mat eases installation time.
  • Fast delivery on custom shapes and sizes with no need for special tooling costs.
  • Multiple zones in one mat housing available.
  • Designed specifically for the rigorous industrial environment.
  • Easy system to install.
  • No vacuum seal to break which induces rust and leads to dead zones.
  • Can absorb punctures.
  • Dual ribbed mat housing.
  • High-temp welding mats available
  • Non-skid or high temperature/wet environment mats available.
  • Hermetically sealed sensor system (NEMA 6, IP67).
  • Adapts well to uneven factory floor installations.
  • Custom engineered systems available.
  • Large selection of sizes and capabilities.
  • Maximum intermittent load on an mat is 3000 PSI.
  • Provides visual recognition of the guarded zone.
  • Warranty 2 years.

“Clients Say”

Provide powder coating services, great quality, responsive to special requests. Highly recommend

Rescom Rads

Latest News

Now Selling Amada Products

Posted on 20 May 2020
Now Selling Amada Products
Metal Form Products Co is excited to announce our latest partnership with Amada products. We will now be selling an...
Posted in:NewsPress Releases  

Safety Ram Blocks Website Launch

Posted on 17 October 2019
Safety Ram Blocks Website Launch
Metal Form Products Co Ltd is excited to announce the launch of our Safety Blocks website. www.safety-blocks.com. ...
Posted in:News  
< Previous | 1 | 2 | 3 | Next >

Our vision is to maintain an organization
committed to the belief that ownership of
anything less than 100% market share
represents an opportunity to be more customer
focused.

With many years of experience we have solutions to problems where others have failed.

CONTACT US

Metal Form Products Co. Ltd.

6-1734 Orangebrook Court Pickering, Ontario, L1W 3G8 Canada
Telephone: 905-831-1111
Toll Free: 1-888-285-8885